Note: Sea-Bird uses the following equation in its sensor to convert the internal raw measurement in psia to decibar:
   Pressure (db) = [pressure (psia) – 14.7] * 0.689476
where 14.7 psia is the assumed atmospheric pressure (based on atmospheric pressure at sea level).

Average Water Pressure [dbar]
Showing data from 12/15/2011 to 12/1/2011

Next [ Month | Year ] Last Prev [ Month | Year ] First Start Time: 2011 September October November December 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 End Time: 2011 December November October September 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
Time (in GMT)	Measurement Value
Next [ Month | Year ] Last Prev [ Month | Year ] First 123 => good data MM => data is determined as missing -- => data not received/configured Back to Top Back to Top
12/15/2011	486.67
12/14/2011	487.96
12/13/2011	492.95
12/12/2011	495.23
12/11/2011	496.85
12/10/2011	495.58
12/9/2011	494.45
12/8/2011	495.97
12/7/2011	496.43
12/6/2011	494.81
12/5/2011	497.53
12/4/2011	498.69
12/3/2011	495.70
12/2/2011	496.04
12/1/2011	497.78