Note: Sea-Bird uses the following equation in its sensor to convert the internal raw measurement in psia to decibar:
   Pressure (db) = [pressure (psia) – 14.7] * 0.689476
where 14.7 psia is the assumed atmospheric pressure (based on atmospheric pressure at sea level).

Average Water Pressure [dbar]
Showing data from 3/15/2013 to 3/1/2013

Next [ Month | Year ] Last Prev [ Month | Year ] First Start Time: 2012 2013 May June July August September October November December January February March 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 End Time: 2013 2012 March February January December November October September August July June May 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
Time (in GMT)	Measurement Value
Next [ Month | Year ] Last Prev [ Month | Year ] First 123 => good data MM => data is determined as missing -- => data not received/configured Back to Top Back to Top
3/15/2013	479.23
3/14/2013	478.18
3/13/2013	483.46
3/12/2013	492.43
3/11/2013	492.63
3/10/2013	491.14
3/9/2013	496.88
3/8/2013	494.89
3/7/2013	492.49
3/6/2013	493.12
3/5/2013	494.42
3/4/2013	490.05
3/3/2013	490.74
3/2/2013	492.05
3/1/2013	495.02